![]() ![]() Our standard cable uses the SiLabs CP2102 USB to serial chipset. Note: FT-100 and FT-100D transceivers do not allow memory programming using a cable. The cable contains a USB to serial converter, so the radio appears as a COM (serial) port on the PC. The other end has a USB plug which connects to the PC's USB port. One end of the cable has an 8-pin mini-DIN plug which connects to the radio: If you are working satellites, your computer can automatically track your transmit and receive frequencies and compensate for doppler shift. Contest and logging software can fetch your operating frequency and mode direct from the radio. ![]() Extend up to 5m by adding a USB extension cable (not included)įor example, you can use remote control software like Ham Radio Deluxe or edit and backup your memory channels easily.Length approx 1.7m/5ft 6ins - long enough even if your PC is under your desk.Superior quality USB to serial chips for guaranteed reliability.Every cable is individually assembled and tested in our UK workshop.High quality screened (shielded) cable to reduce noise and RF interference.This handy cable allows control of your Yaesu transceiver by your computer. This unique cable not only allows you to control your radio from your PC, but also provides a linear amplifier PTT switching output too! One problem with the FT-8x7 series of transceivers is that the CAT interface and the PTT output share the same connector. CAT control AND linear switching with one clever cable! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |